What to do if...
25
Pressure has to be regulated between 2 and 3 bar.
Check CO pressure
₂
Warning
Never exceed the indicated inlet value
For further information see the chapter on first installation.
Please check the gauge while dispensing cold sparkling water.
Pressure has to be regulated 0.5 bar above inlet water value operating on the CO plastic knob.
₂
Water leakage check
Warning If water covers the whole base, please turn off the appliance, close the inlet water and
call the Assistance.
Check if there is water inside the base, especially near water leakage sensors, then dry it carefully.
1
Left rear side water leakage sensor
2
Right rear side water leakage sensor
3
Left middle side water leakage sensor
Cold restart
Turn off the appliance for 30 minutes, then turn it on again.
Environment concerns
The symbol on the product or on its packaging indicates that this product should not be treated as
household waste. It should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information about recycling
of this product, please contact your local council, your household waste disposal service or the shop