13 TURN ON THE POWER
•
Set the Master Power switch to the I (ON)
position.
•
Check to make sure power to refrigerator is
on by opening refrigerator door to see if
interior lights are on.
•
The temperature controls are preset at 37°
for the Fresh Food section and 0° for the
Freezer section.
•
Allow 24 hours to stabilize before making
adjustments.
•
Dispense water for 2 minutes to remove
trapped air from the water system.
Raise
Grille
Panel
Master
Power Switch
12 CONNECT WATER SUPPLY
Check to make sure that Master Power
switch is in the O (OFF) position.
•
Locate and bring tubing to the front of the
cabinet.
•
Turn the water on to flush debris from line.
Run about a quart of water through tubing
into a bucket, then shut off water.
Copper Tubing
•
Slip a 1/4
″
nut and ferrule onto end of
copper tubing. Insert tube into the union
fitting on the unit and tighten nut to union.
•
Turn on the water to check for leaks.
Note: Make sure excess tubing length does
not interfere with toekick installation.
Refrigerator
Water Supply
House
Water Supply
Installation Instructions
35
Summary of Contents for 42
Page 43: ...43 ...