background image

2

Finding Information

Please read and save this 
guide

Thank you for choosing Electrolux, the new 
premium brand in home appliances. This Use & 
Care Guide is part of our commitment to customer 
satisfaction and product quality throughout the 
service life of your new ice maker. 

We view your purchase as the beginning of a 
relationship. To ensure our ability to continue 
serving you, please use this page to record key 
product information.

Keep a record for quick 
reference

Questions?

For toll-free telephone support in the U.S. and 

Canada: 1-877-4ELECTROLUX (1-877-435-3287)

For online support and product information visit 

http://www.electroluxusa.com

       

NOTE

Registering your product with Electrolux 

enhances our ability to serve you. You can 

register online at www.electroluxusa.com or by 

dropping your Product Registration Card in the 

mail.

       

IMPORTANT

PLEASE READ all instructions completely before 
attempting to install or operate the unit.
All ice makers require a connection to both a 
water supply and an electrical power source. 
Improper hook-up can result in substantial 
property damage!  Proper installation, in 
accordance with the manufacturer’s specifications 
and all local codes, is the sole responsibility of the 
consumer.  The manufacturer is not responsible 
for any installation expenses or damages incurred 
due to improper installation.  If you are unsure of 
your ability to safely make electric power, water 
supply, and water drain connections to the unit, 
consult licensed and insured professionals to 
perform all electrical and plumbing work.

Once you have your unit installed, we suggest 
you keep this manual in a safe place for future 
reference. Should any problems occur, refer to 
the Troubleshooting section of this manual. This 
information will help you quickly identify a problem 
and get it remedied. In the event you require 
assistance, please contact the dealer where you 
purchased your unit.

Whenever you call to request information or 
service, you will need to know your model number 
and serial number. You can find this information on 
the serial plate located on the inside wall of your 
unit and on the product registration card.

©2007  Electrolux Home Products, Inc.
Post Office Box 212378, Augusta, Georgia 30917, USA 

All rights reserved. Printed in the USA

Please record the purchase date of your Electrolux 
unit and your dealer’s name, address and 
telephone number.

________________________________________

Purchase Date

________________________________________

Electrolux Model Number

________________________________________

Electrolux Serial Number

________________________________________

Dealer Name

________________________________________

Dealer Address

________________________________________

Dealer Telephone

Keep this manual and the sales receipt together in 
a safe place for further reference.

Summary of Contents for 241927600























Reviews: