11.
TROUBLESHOOTING
Problem 1)
Possible cause
Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connec-
ted to mains supply.
Connect in at mains socket.
Check fuse in fuse box (domestic
installation).
The loading door is opened.
Close the loading door.
The
ON/OFF
button was not
pushed.
Push the
ON/OFF
button.
The
Start/Pause
button
was not pushed.
Push the
Start/Pause
but-
ton.
The appliance is in the standby
mode.
Push the
ON/OFF
button.
The filter is missed or in wrong
position.
Insert the filter in the right posi-
tion.
The
E10
error code on the display
- clogged filter.
Clean the filter.
2)
The
E59
error code on the display
- dryer overloaded.
Unload part of the laundry. Obey
the maximum load.
Unsatisfactory
drying result.
Incorrect programme selection.
Do the selection of the applicable
programme.
3)
The
EF0
error code on the dis-
play - filter abnormally dirty.
Clean the filter.
2)
The filter is clogged.
Clean the filter.
2)
Too high volume of the load.
Obey the maximum load volume.
The airflow grill is clogged.
Clean the airflow grill in the bot-
tom of the appliance.
Dirt on the humidity sensor in the
drum.
Clean the front surface of the
drum.
Incorrect remaining laundry mois-
ture degree.
Adjust remaining laundry moisture
degree.
4)
The condenser is clogged.
Clean the condenser.
2)
The loading
door does not
closed
The filter not locked in the posi-
tion.
Put the filter in the correct posi-
tion.
The laundry is locked between
the door and the seal.
Put the load correctly in the drum.
ENGLISH
19
