4.
Gather lint with hand from internal
parts of the filter.
Throw the lint in the dustbin.
5.
If necessary, clean the filter with a
vacuum cleaner. Close the filter.
6.
If necessary remove the lint from the
filter socket and gasket. You can use a
vacuum cleaner. Put the filter inside
the filter socket.
10.2
Emptying the water
container
Empty the condensed water container
after each drying cycle.
If the condensed water container is full,
the programme stops automatically. The
Reservoir
symbol comes on the
display and you must empty the water
container.
To empty the water container:
1.
Pull the water container out keeping it
in a horizontal position.
2.
Pull the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3.
Push the plastic connection back in
and place the water container back
into position.
4.
To continue the programme press the
Start/Pause button.
10.3
Cleaning the condenser
If the symbol
Condenser
flashes on
the display, the condenser and its
compartment must be cleaned.
To clean the condenser and its
compartment:
1.
Open the door.
2.
Move the release button on the
bottom of the door to open the
condenser door.
3.
Turn 2 blockages to unlock the
condenser cover.
ENGLISH
17
