8.3
Turning on the appliance
To turn on the appliance:
Push the ON/OFF button.
If the appliance is on, some indicators
appear on the display.
8.4
Auto Off function
To decrease the energy consumption, the
Auto Off function turns the appliance off
automatically:
• if the
Start/Pause touch button
is not touched within 5 minutes.
• 5 minutes after a cycle ends.
Push the ON/OFF button to turn on the
appliance.
If the appliance is on, some indications
appear on the display.
8.5
Setting a programme
Use the programme dial to set the
programme.
The time to the programme end comes
into the view on the display.
8.6
Starting a program
To start the program:
Touch the
Start/Pause
button.
The appliance starts and the LED above
the button stops flashing and stays on.
8.7
Program change
To change a program:
1.
Push the ON/OFF button to turn
the appliance off.
2.
Push the ON/OFF button again to
turn on the appliance.
3.
Set a new program.
8.8
Programme end
Clean the filter and drain the
water container after each
drying cycle. (See chapter
CARE AND CLEANING.)
If the drying cycle is completed, the
symbol flashes on the display and the
acoustic signal sounds intermittently for 1
minute.
If you do not turn off the
appliance, the crease guard
phase starts. Laundry can be
removed during this phase.
To remove the laundry:
1.
Push the
ON/OFF
button for 2
seconds to turn off the appliance.
2.
Open the appliance door.
3.
Remove the laundry.
4.
Close the appliance door.
ENGLISH
15
