4619
5
2
0 0 0 0 0
D2223
1
2
3
4
INSTRUCTION
HANDBOOK
01102060
Notice
Date Page
2. General
Stacker control panel
1. Emergency stop pushbutton
2. Linen stack removal indicator
3. Linen removal pushbutton or re-initialisation of
stacker defect
4. Sheet counter with reset function
Note: the ironer - dryer will not operate if the
stacker is not connected to the power supply.
When a stack has been created (approx. height:
210 mm) on the stacker deck, this stack will be
removed to the evacuation table.
The indicator (2) on the stacker control panel
will flash for a few seconds to indicate that a
stack has been completed.
Note: the evacuation table can contain one completed stack and another stack in progress on the
stacker deck.
Remove the stacks as they reach the evacuation ramp.
A pushbutton (3) can be used to evacuate the stack of linen manually.
A sheet counter (4) with reset function can be used to count the items ironed during a given period.
