Electrolux Professional IC64819FFS Operating Handbook Download

Page: 18 / 74

4619

INSTRUCTION

HANDBOOK

01102060

Notice

Date Page

Note about the A.C. power

•

According to the EN 60204-1:1997 standard, the machine is provided for AC supplies

corresponding to the extracted caracteristics below :

4.3.2 AC supplies

Voltage :

Steady state voltage : 0,9…1,1 of nominal voltage.
Frequency :

0,99…1,01 of nominal frequency continuously.

0,98…1,02 short time.
Harmonics :

Harmonic distorsion not to exceed 10% of the total r.m.s. voltage between live

conductors for the sum of the second through to the fifth harmonic. An additional 2%

of the total r.m.s. voltage between live conductors for the sum of the sixth through to

the 30th harmonic is permissible.
Voltage unbalance :

Neither the voltage of the negative sequence component nor the voltage of the zero

sequence component in three-phase supplies shall exceed 2% of the positive

sequence component.
Voltage interruption :

Supply interrupted or at zero voltage for not more than 3ms at any random time in the

supply cycle. There shall be more than 1s between successive interruptions.
Voltage dips :

Voltage dips shall not exceed 20% of the peak voltage of the supply for more than one

cycle. There shall be more than 1s between successive dips.

2. General

Summary of Contents for IC64819FFS











































































Search results

Summary of Contents for IC64819FFS

Reviews:

Related manuals for IC64819FFS

Brands by name

Popular brands

Electrolux Professional IC64819FFS, Operating Handbook

Search results

Summary of Contents for IC64819FFS

Reviews:

Related manuals for IC64819FFS

Brands by name

Popular brands