Electrolux Professional IC6 48 FFS Series, Installation Manual

Page: 8 / 80

8
Installation manual
Important
It is specially advised not to install the machine on a synthetic floor covering. The frictional electricity
may hinder the good working of the machine
Under no circumstances should a gas-heating machine be installed in a building which includes a dry-
cleaning machine.
This is particularly important for your safety and that of others. The consequence is an immediate can-
cellation of the warranty
.
Important
When using the machine in automatic folding mode, you could catch your fingers when the sheet remov-
al actuator ascends/descends with the anti-static device and in folding arm movements.
Do not operate on the machine without powering down beforehand.
Caution
For your own safety, it is prohibited and dangerous to solder the ironing cylinder. If a leak occurs, never
try to repair it yourself. Ask our technical departments for advice.
The machine can work without the protective casing when the electric supply is not cut off.
Interlock the main isolating switch with a padlock.
Close the steam inlet valves.
If you detect gas smells, turn off the gas, open the windows, do not activate any switch and warn the
maintenance service.
The warranty might be cancelled if these instructions are not complied with.
1.3.1 Precautions for use
• The machine should not be used by children.
• This ironer must be used exclusively for textiles appropriate for machine ironing, which have been previously and
exclusively washed in water.
• This machine is for professional use and must be used exclusively by qualified personnel.
• Blankets should not be ironed.
• Do not iron linen coated with solvent, paint, wax, grease or any easily inflammable products.
• In case of gas heated machine, do not assemble the machine on premises containing a dry cleaning machines or
other similar machines.