background image

5

A.2

Personal protection equipment

Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's
service life.

Stage

Protective

garments

Safety

footwear

Gloves

Glasses

Safety

helmet

Transport

Handling

Unpacking

Installation

1

Normal use

2

Adjustments

Routine
cleaning

1

ˉ

3

Extraordi-
nary
cleaning

1

ˉ

3

Maintenance

Dismantling

Scrapping

Key:

PPE REQUIRED

PPE AVAILABLE OR TO BE USED IF NECESSARY

PPE NOT REQUIRED

1. During these operations, gloves must be cut-resistant. Failure to use the personal protection equipment by

operators, specialized personnel or users can involve exposure to damage to health (depending on the
model).

2. During these operations, gloves must be heatproof to protect hands from contact with hot food or hot parts of

the appliance and/or when removing hot items from it. Failure to use the personal protection equipment by
operators, specialised personnel or users can involve exposure to chemical risk and cause possible damage
to health (depending on the model).

3. During these operations, gloves must be suitable for contact with chemical substances used (refer to the

safety data sheet of the substances used for information regarding the required PPE). Failure to use the
personal protection equipment by operators, specialized personnel or users can involve exposure to
chemical risk and cause possible damage to health (depending on the model).

A.3

General safety

• The machines are provided with electric and/or mechanical safety devices for protecting

workers and the machine itself.

• Never operate the machine, removing, modifying or tampering with the guards,

protection or safety devices.

• Do not make any modifications to the parts supplied with the appliance.
• Several illustrations in the manual show the machine, or parts of it, without guards or

with guards removed. This is purely for explanatory purposes. Do not use the machine
without the guards or with the protection devices deactivated.

• Do not remove, tamper with or make illegible the safety, danger and instruction signs

and labels on the machine.

Summary of Contents for 371000





















Reviews: