background image

ELECTROHOME WARRANTY

Consumer Electronics Products and Home Appliances

Thank you for choosing ELECTROHOME!

RGC Redmond Group gives the following express warranty to the original consumer purchaser or gift recipient for this
Electrohome brand product, when shipped in its original container and sold or distributed in Canada by RGC
Redmond Group or by an Authorized Electrohome Dealer:

RGC Redmond Group warrants that this product is free, under normal use and maintenance, from any defects in
material and workmanship. If any such defects should be found in this product within the applicable warranty period,
RGC Redmond Group shall, at its option, repair or replace the product as specified herein. Replacement parts
furnished in connection with this warranty shall be warranted for a period equal to the unexpired portion of the original
equipment warranty.

This warranty shall not apply to:

a. Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper

installation or inappropriate use as outlined in the owner’s manual.

b. Any Electrohome product tampered with, modified, adjusted or repaired by any party other than RGC

Redmond Group or Electrohome’s Authorized Service Centres.

c. Damage caused or repairs required as a result of the use with items not specified or approved by RGC

Redmond Group, including but not limited to head cleaning tapes and chemical cleaning agents.

d. Any replacement of accessories, glassware, consumable or peripheral items required through normal use of

the product including but not limited to earphones, remote controls, AC adapters, batteries, temperature
probe, stylus, trays, filters, cables, paper, cabinet, cabinet parts, knobs, buttons, baskets, stands, shelves,
cookware and  cooking utensils.

e. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
f. Any damage caused by external or environmental conditions, including but not limited to transmission line/

power line voltage or liquid spillage.

g. Any product received without appropriate model, serial number and CSA /cUL /cULus /cETL /cETLus

markings.

h. Any products used for rental or commercial purposes.
i. Any installation, setup and/or programming charges.

Should this Electrohome product fail to operate during the warranty period, warranty service may be obtained
upon delivery of the Electrohome product together with proof of purchase and a copy of this LIMITED
WARRANTY statement to an Authorized Electrohome Service Centre. In-home warranty service may be
provided at RGC Redmond Group’s discretion on any Electrohome television with the screen size of 27” or
larger. This warranty constitutes the entire express warranty granted by RGC Redmond Group and no other
dealer, service centre or their agent or employee is authorized to extend, enlarge or transfer this warranty on
behalf of RGC Redmond Group. To the extent the law permits, RGC Redmond Group disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of
profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of
time or use of this Electrohome product or the loss of information. The purchaser will be responsible for any removal,
reinstallation, transportation and insurance costs incurred. Correction of defects, in the manner and period of time
described herein, constitute complete fulfillment of all obligations and responsibilities of Electrohome Electronics to the
purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract,
negligence, strict liability or otherwise.

CARRY-IN PARTS & LABOUR WARRANTY PERIODS:

• Audio Products: 1 Year (Remote Control, if applicable – 90 Days)
• DVD Products: 1 Year (Remote Control – 90 Days)
• LCD & Plasma Display TV: 1 Year (Remote Control – 90 Days)
• Television Products: 1 Year (Remote Control – 90 Days)
• VCR Products: 1 Year (Remote Control – 90 Days, Video Heads – 6 Months)
•  Home Appliances: 1 Year

 Microwave Magnetron parts only additional 6 Years

 Refrigerator / Freezer Compressor parts only, additional 4 years

• Heating / Cooling & Humidification Products: 1 Year (Remote Control – 90 Days)

 Compressor parts only (if applicable), additional 4 years

To obtain the name and address of the nearest Authorized Electrohome Service Centre or Dealer, please contact:
RGC Redmond Group, 6185 McLaughlin Road, Mississauga, ON  L5R 3W7.

For more information on this Warranty or Service Locations, please call (905)366-5100 or toll free 1-800-663-5954,
Monday to Friday 9:00am – 5:00pm Eastern Standard Time.

04/2006

Printed in Thailand

J5W90601A SH06/06 

N

 5W90601A [En]57-BACK

5/19/06, 1:52 PM

60

Summary of Contents for 20ET202V





























































Reviews: