manualshive.com logo in svg

Electrohome 20ET202V, User Manual

Share
Download
Electrohome 20ET202V User Manual Download Page 52

52

To change the parental level

NOTE:

Do not forget the password. If you forget
the password, contact the dealer that
you purchased the unit from.

1

Press 

SETUP/TV MENU 

in the

stop mode or No Disc.
Press 

 or 

 to select 

option. Then press 

 or

ENTER

.

2

Press 

Number buttons (0-9)

 to

enter the password you have
stored.

• If you input a wrong number,

press

 CANCEL

.

3

Press 

ENTER

.

The rating is now unlocked.

4

Press 

 to select “Parental”,

then press 

 or 

 to change

the parental level.

5

Press 

 to select “Password”,

then press 

Number buttons (0-

9)

 to enter the password.

NOTE:

 You can change the

password at this time if you
want.

6

Press 

ENTER

.

The parental level is changed
and locked.

7

Press 

SETUP/TV MENU 

or 

RETURN

 to remove the menu

screen.

Password

Parental

5

/0-9/Enter/Cancel/Setup/Return

1 2 3 4

Password

Parental

3

/0-9/Enter/Cancel/Setup/Return

----

Password

Parental

3

/0-9/Enter/Cancel/Setup/Return

1 2 3 4

Password

Parental

/Setup/Return

----

5

Password

Parental

5

/0-9/Enter/Cancel/Setup/Return

----

Password

Parental

3

/0-9/Enter/Cancel/Setup/Return

----

 5W90601A [En]51-56

18/5/06, 2:51 PM

52

Summary of Contents for 20ET202V





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands