16
The Auto clock function will automati-
cally set the built-in clock (Month,
Day, Year and Time) when the unit is
connected to an Antenna or Cable TV
system and it is turned off. As the unit
searches for a receivable station in
your area and it receives a broadcast
signal for Auto clock, the Auto clock
needs several minutes to set itself.
Auto clock setting
1
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2
Plug the AC Power cord to the AC outlet.
3
Make sure the unit is turned off.
• If you press
POWER
, Auto clock set is not effective.
4
Wait at least three minutes and press
POWER
.
• Depending on the reception condition, it may take approx.
30 minutes.
5
Press
DISPLAY/CALL
to check the clock on the screen.
6
If the clock is not set, make sure you are receiving TV
channels. The Auto clock may not function properly if the
reception condition is not good.
Auto clock adjustment
The Auto clock adjustment will be performed at 12:00 AM everyday
if you turn off the unit.
• If you use a cable box and you want Auto clock adjustment to be
performed, the cable box must be left on.
• The Auto clock adjustment won’t work if there is more than 5
minutes between the built-in clock time and the actual time.
To set Auto clock to off
When shipped from factory “AUTO CLOCK” is set to “ON”.
But if you do not want Auto clock set (Adjustment):
1
Turn on the unit.
2
Press
SETUP/TV MENU
in the TV/VCR mode.
The TV/VCR menu screen will appear.
3
Press
or
to select
option.
4
Press
or
to select “AUTO
CLOCK” .
5
Press
or
to select “OFF”.
6
Press
SETUP/TV MENU
repeat-
edly to return to the normal
screen.
• When “AUTO CLOCK” is set
to “OFF”, the Auto clock
adjustment does not function.
• Set the clock manually (see
page 18).
Auto clock setting
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
ON
STANDARD TIME
DAYLIGHT
SAVING TIME
/
/
/
/ MENU
CH
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
ON
STANDARD TIME
DAYLIGHT
SAVING TIME
/
/
/
/ MENU
CH
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
OFF
STANDARD TIME
DAYLIGHT
SAVING TIME
/
/
/
/ MENU
CH
NOTES:
• After a power failure or disconnection
of the power, the timer settings will be
lost. In this case, reset the present time.
• If you live in Newfoundland and the
Auto Clock does not function properly,
set the AUTO CLOCK menu option to
“OFF” and set the clock manually.
5W90601A [En]12-17
18/5/06, 2:49 PM
16
