This document is a property of ElectroFlip LLC No unauthorized reproduction is allowed.
7
indicator light will be flashing which means that the device is recording. If you only see a
red indicator light lit up that would mean that the micro SD card has a problem. Take
the micro SD card out and reformat it then reinsert it back to the camera.
STOP A RECORDING
Soft Stop Recording
1.
If iBulb is recording, press the “S” button once.
2.
The blue and red indicator light will turn on which indicates that the camera is in
standby mode. Wait for 3 – 5 seconds then push the micro SD card to eject it (remove
the card). When the card is out, only the red indicator light is on.
3.
If the card is not taken out, just press the “S” button again to continue recording. The
blue indicator light will keep flashing which is an indication that the camera is recording.
4.
Assuming that the device’s power is on. If the card is taken out, insert the card again
then wait for 10 seconds. The blue indicator light will keep flashing which means that
the camera is recording. You can also insert the card then press the “S” button once.
The blue indicator light would keep flashing to denote that the camera is recording
Hard Stop Recording
1.
If the camera is recording and you want to stop the recording, just simply turn off the
power.
2.
Then, wait for 3 – 5 seconds before taking the card out.
3.
If you want to continue recording, just insert the card again and turn on the power.
HOW TO PLAYBACK A VIDEO
1.
Take out the micro SD card from the camera.
2.
Put the card into a card reader and plug it into the computer’s USB port.
3.
On the computer, removable disk drives will pop-up.
4.
Browse its contents and look for the folder “VIDEO” then “RECORD”.