ELECTRODRIVE Tug Tough 10T, Operating Manual

Page: 9 / 28

Tug Tough 10T—Operating Manual
9
Hitching to a trolley
This Tug has a variety of hitches. In all cases, ensure that the trolley it is being attached
to has its brakes engaged (or chocked), and is free from obstruction. Inspect the trolley
and ensure that the trolley castors are in good condition.
In all cases, ensure that the trolley being attached to has its brakes engaged (or
chocked) and is free from obstruction. Inspect the trolley and ensure that the trolley
castors are in good condition.
Towing a trolley with castors in poor condition can overload the Tug,
and cause damage not covered under warranty.
This Tug is not designed for use on inclined surfaces and doing so may
pose a risk of accident or injury. Use this Tug on level ground only.
771 1940
964
REV DCN/SI DESCRIPTION DATE BY CHD APPD
3 - GA 01/05/17 AD LO FQ
TOLERANCE REQUIREMENTS
Natural
Material <not specified>
Assembled
COLOUR
PROCESS
TREATMENT
FINISH
TOUGH TUG 10T GENERAL ARRANGEMENT
Dimensions in
milimeters unless
specified.
2A Ayton Street, North Sunshine, VIC 3020
Phone: (+61) 03 9300 8500 Fax: (+61) 03 9312 3441
Unless Otherwise Stated Are:
No Decimal Place = +/- 0.5
One Decimal Place = +/- 0.1
Two Decimal Places = +/- 0.05
TOLERANCES MUST NOT BE
CUMULATIVE UNLESS
OTHERWISE SPECIFIED.
Kg
LOCATION
DO NOT SCALE FROM DRAWING REMOVE ALL BURRS & SHARP EDGES
DIMENSIONS MARKED WITH
ARE SIGNIFICANT INSPECTION DIMENSIONS.
MASS
1:201/1
MATERIAL
SCALE:
Part Number
PAGE: SIZE:
A3
Rev
©
Monday, 1 May 2017
- This dimensioned drawing is the property of Electrodrive Pty
Ltd. It is supplied only to aid the making of parts for Electr
odrive, and must not be used against their
interests, supplied to 3rd parties, be copied, reproduced, use
d for manufacture or for any other purpose without the prior wr
itten permission of Electrodrive Pty. Ltd.
3
Description
TT10-R3-DUMMY
TUGTOUGH10TNH