8
Brakes
When the throttle lever is released, the unit is slowed electrically by dynamic braking
until the machine and load comes to a complete stop.
Horn
The small yellow button on the console is a horn button. Push to sound the horn,
release to turn off.
Capacity
Refer to the serial plate for the unit’s safe working load, located on the body adjacent to
the tiller post.
Driving instructions
Safety Check
Before using the Tug the operator should complete the following check:
1. The battery charger is not connected.
2. The direction selector works.
3. The emergency stop button is released.
4.
The battery isolator key is in the closed position (if fitted).
5. The speed governing dial is set at ‘low’, or where desired by the operator.
6. The brakes operate correctly when the throttle lever is released.
7. The battery indicator shows adequate charge.
8. There is no visible damage to the unit.
9. Back-off button works correctly.
Summary of Contents for Tug Tough 10T
