technical support center. Always use spare parts of the same type.
Do not connect the moving head to any dimmer or power pack.
Do not open the device during operation, high voltage may cause a lethal electric
shock.
In order to prevent or reduce fire or electric shock hazards, do not expose the
device to rain or humidity.
Do not ever touch the led with your bare fingers after use to avoid serious injuries,
for the led may be very hot still.
Do not start the moving head without led to avoid degradation of the box..
Replace the box and the lenses if they are visually damaged (for example
cracks or deep cuts during transport or handling). This is essential.
Do not look straight at the light going out of led when the moving head is switched
on.
In order to prevent any risks of electrical shock you must not remove the cover.
There is no useful part for the user inside. Refer the repair to qualified personnel.
installation :
The moving head must be attached via its mouting holes to the support with help of the provided hook.
Always make sure the moving head is firmly attached to avoid vibrations and sliding during the
operation.. Always make sure the structure to which the moving head is attached is secured and able
to bear 10 times the moving head’s weight.
2. Technical specifications :
This device do not produce radio interferences. This device meets French and European
requirements. Compliance has been established, statements and respective documents
have been registered by the manufacturer. This device has been made for indoor decorative
lighting effects.
Power Supply :
AC 220-250V 50/60Hz
Power :
300 W
Lamp :
LED BLANCHE 200W
Shutter/Dimmer : Blackout, DIMMER 0~100%, variable strobe speed and soft transition.
Movement :
Pan: 540°
Tilt:270 °
Colors :
9 White
Gobos :
1 wheel with 7 gobos+ rotating whites
1 rwheel with 9 static gobos + white
Prisms:
1 rotating prism with 3 facets
Beam:
1 Zoom 8/30 degrees
1 Frost
1 Electronic focus
Weight/Dimensions:
14,5 Kg / 50X31X25cm
4