System overview
Each X1-212/90 full-range element consists of one (1) SMX2121 12-inch (304.8 mm) LF
drivers coupled to a MBH (Mid Band Hydra) and two (2) ND2R 2-inch-diaphragms (50.8 mm)
HF drivers. Each HF driver is mounted on a WCH (Wavefront-shaping Circular Hydra)
planar-wave generator and vertically orientated.
X1 is designed in a two-way configuration with a 90° horizontal x 10° vertical coverage pattern
and an internally selectable passive crossover/EQ network. The enclosure is trapezoidal in the
vertical plane with a 10° total included angle.
Each X2-212/90 full-range element consists of one (1) DVN3125 12-inch (304.8 mm) LF drivers
coupled to a MBH and two (2) ND6A 3-inch-diaphragms (76.2 mm) HF drivers. Each HF driver
is mounted on a PDH (Pin Diffraction Hydra) planar-wave generator and vertically orientated.
X2 is designed in a two-way configuration with a 90° horizontal x 10° vertical coverage pattern
for bi-amp use only. A passive crossover/EQ network is neither included nor available. The
enclosure is trapezoidal in the vertical plane with a 10° total included angle.
The X12-128 dual-18-inch subwoofer includes two (2) DVF4180 woofers designed specifically
for subwoofer applications, providing reliable low-frequency performance at high SPL levels
with low distortion and solid impact. Subwoofer elements do not have internal passive
crossovers and require an active crossover and dedicated amplifier channel(s) for proper
operation.
X12 is a compact rectangular dual-18-inch subwoofer element designed for use only as a
ground stack subwoofer array. The X12-128 is also designed to be used in ground stack
cardioid arrays.
All X1 & X2 elements are available in black and are supplied with the hardware necessary to
interface one element to another.
X12TC-GRID: standard grids for up to 24 X1 or X2 elements for simple or mostly straight
arrays, where extreme tilt angles are not required.
X12TE-GRID: extended grids for up to 24 X1 or X2 elements for extreme down angles in small
to medium arrays and typical up or down angles in large arrays.
X12PU-BGK: Pull Up Bottom Grid Kit for X1 or X2 elements. A pull-up kit is used when the
compression rigging method is being used with an array or when extreme down angles beyond
the capabilities of the extended grid are required.
The three (3) different grid options (X12TC, X12TE and X12PU-BGK) are sold separately.
Consult LAPS 3 for proper grid selection and array design.
X12T-Dolly: Dolly is used for transporting X1 or X2 loudspeaker systems. The dolly
accommodates two (2) columns of X1 or X2 loudspeaker systems stacked three (3) high for
transportation (Total of six (6) systems per dolly). Systems are secured to the dolly via their
rigging pins. A rigid top cover provides a solid surface for stacking and two (2) dolly side
panels provide protection for speaker grilles. The dolly may also be used as a ground stack
platform, either wheeled or stationary by using the dolly top cover.
3
X-LINE ADVANCE Systems
2015.04 | 02 | F.01U.310.953
Installation Manual
Electro-Voice
