Electro-Voice DC-One, Owner'S Manual

Page: 11 / 49

DC-One
Owner‘s Manual 11
screen. Use the Select buttons to activate the top line of the display, and the value buttons to scroll through
available parameter edit screens.
4/5 – Value Up/Down Buttons
Depending on the current LCD screen, the Value Up/Down Buttons performs the following function:
• Recall – Select forwards/backwards through the stored preset list to select a preset to be recalled to
current memory.
• Store – Select User Preset destinations forwards/backwards to select a destination for the currently
edited preset, scroll forwards through ANSI character set to name preset.
• Edit / Setup – Scroll forwards/backwards through Edit / Setup screens when the top line of the LCD
screen is active. Scroll forwards through values for the selected parameter in an Edit / Setup screen.
6 – Edit / Compare Button
Pressing the Edit button while in Run mode places the current preset in Edit mode and the Edit button
lights. The LCD display shows the last edit screen that was selected. From this point, any edit screen can
be displayed and altered.
Pressing the Edit button again “compares” the edited preset, if parameters have been altered, to the
original un-edited preset. This compare function will audibly switch between the altered parameters and
the previously stored settings, allowing you to hear the effect of any DSP changes that have been made.
Use this feature to monitor progress in editing or creating presets.
Subsequently recalling a new preset will prompt you to save changes, which you may do or not.
7 – Setup Button
Pressing the Setup button while in Run mode displays the Setup menus in the LCD display and the Setup
button lights. In this mode, any Setup menu can be displayed and altered. Changes made to Setup menu
items are saved automatically.
To exit Setup mode, press the Setup button again. The LCD display will revert to Run mode.
8 – Select < Button
The Select < button is pressed to navigate backwards through Edit, Setup and / or Recall menu displayed.
The button cycles through all available value fields in a screen and wraps around from first to last.
9 – Select > Button
The Select > button is pressed to navigate forwards through Edit, Setup and / or Recall menu displayed.
The button cycles through all available value fields in a screen and wraps around from last to first.