CONTRACTOR PRECISION SERIES
8 Owner‘s Manual
ventilation. Since temperatures inside of the cabinet/rack case can easily rise
up to 40 °C during operation of the power amp, it is mandatory to bear in mind
the maximum allowable ambient temperature for all other appliances installed
in the same cabinet/rack case.
For fixed amplifier installations in a device control room that incorporates a central air-cooling system or air conditioners,
calculating the maximum heat emission may be necessary. Please also take notice of the information on page 7.
Fan Cooling
The power amplifier has two fans. The fans are temperature controlled, i.e. they are not running permanently but the running
speed of the fans is controlled continuously depending on the ambient temperature. That in return ensures very silent running
during idle state. The temperatures of the power amp‘s channels are registered and monitored separately.
2.6 Selecting the Mode Of Operation (MODE)
The MODE switch on the power amp‘s rear panel defines how the audio inputs handle the input signals. The amplifier types
CPS4.5 and CPS4.10 allow the configuration of audio inputs CH 1/CH 2 or CH 3/CH 4, the amplifier type CPS8.5 additionally
allows configuration of audio CH 5/CH 6 or CH 7/CH 8.
In the following description of the modes DUAL, PARALLEL or BRIDGED the generic letters A and B are used for the two
audio inputs of a MODE switch (e.g. for switch CH 1/CH 2 input A corresponds to CH 1 and input B corresponds to CH 2).
DUAL
In DUAL mode, the two channels of the power amplifier work independent from each other. This mode of operation is being
used for all 2-channel applications, like stereo or Bi-Amp (active) operation. Using the input level controls on the power amp’s
rear panel allows independently adjusting the channels’ amplification.
CAUTION:
Blocking/closing the power amp’s ventilation louvers is not permissible. Without sufficient
cooling/ventilation, the power amplifier may automatically enter protect mode. Keep ventilati-
on louvers free from dust to ensure unhindered airflow.
Do not use the power amplifier near heat sources, like heater blowers, stoves or any other heat
radiating devices.
To ensure trouble-free operation, make certain that the maximum allowable ambient tempera-
ture of +40°C is not exceeded.
Illustration 2.1: Audio signal applied to both input connectors in DUAL mode