manualshive.com logo in svg

Electro-Sensors Electry-Sentry 1, Installation & Operation Manual

Share
Download
Electro-Sensors Electry-Sentry 1 Installation & Operation Manual Download Page 3

Free Catalog and Application Assistance

1.800.328.6170

Website: www.electro-sensors.com

990-005500 Revision D

Table of Contents

Quick Start Guide: .........................................................................................................................................I
Description .....................................................................................................................................................1
Front-Panel Displays ......................................................................................................................................1
Front-Panel User Interface .............................................................................................................................1
Enclosure ........................................................................................................................................................1
 

Ratings and Conduit Holes ......................................................................................................................1

 

Material and Recommended Minimum Installation Area ........................................................................16

 

Dimensions, With and Without Mounting Feet .......................................................................................22

Modes of Operation: ......................................................................................................................................1
 

Normal Mode ...........................................................................................................................................1

 

Program Mode .........................................................................................................................................1

Entering and Using Program Mode ...............................................................................................................1
How to reset the Electro-Sentry 1 to Factory Defaults ..................................................................................2
The UserVar Variables: ..................................................................................................................................2
 

Speed Variables (Var01 through Var10) ...................................................................................................2

 

Sensor Type Select Variable (Var11) ........................................................................................................3

 

The Warning, Shutdown, and BIAS Setpt Temperature Variables (Var12 through Var25) ......................4

 

Temperature Display Select (Var30) ........................................................................................................5

 

System Variables (Var31 through Var36) .................................................................................................6

Electro-Sentry 1 Operation Notes Section: ....................................................................................................9
 Alarms....... ...............................................................................................................................................9
 

Latching and holding of Alarms ..............................................................................................................9

 

How to ‘clear’ Alarms ..............................................................................................................................9

 

Using multiple Electro-Sentry 1’s in the same application ......................................................................10

Built-in Test Features Section: .......................................................................................................................10
 

Temperature Rise and Speed Drop Alarm Test Features .........................................................................10

Troubleshooting Section: ...............................................................................................................................11
 

Standard Temperature vs. 4-20mA Temperature Sensors ........................................................................11

 

‘Out-of-Range’ Sensor Detection.............................................................................................................11

 

LCD Display and 4-digit LED Speed Display Error Messages ...............................................................12

 

Concerning the Var34 Disable/Enable Commands: .................................................................................14

 

The Green Indicator LEDs, the Replaceable Fuse F12, and the Resettable Fuses F1 through F11: .......15

Specifications Table .......................................................................................................................................16
Front Panel Drawing ......................................................................................................................................17
Terminal Block Connections ..........................................................................................................................18
SW1 Vac Selection Switch .............................................................................................................................18
I/O Board - Terminal Drawing .......................................................................................................................19
Typical Wiring Connection Examples ...........................................................................................................20
User Variable List ...........................................................................................................................................21

Summary of Contents for Electry-Sentry 1

































Reviews:

No comments

Brands by name

Popular brands

Load more brands