16
ADD DEVICE
1. At the Device screen select
the + symbol to add a device.
2. You will now be prompted to
scan the QR code which is
located on the underside of the
robot.
3. Now select the Wi-Fi network
from the list and enter the Wi-Fi
password.
4. Reset the device by pressing
the power switch. After
restarting, press and hold the
device button 3-5 seconds. The
device will make a confirmation
tone.
Click next on the phone. Note:
do not attempt to connect from
the charging base. Make sure
that after the long press a
network prompt tone is received.
5. Now the phone, robot and
router will build a connection to
each other.
6. Confirm the message below.
Summary of Contents for iQLEAN-CR01
Page 2: ...2 ...
