12
SETUP OF THE BASE
Place the charging base against a wall. Keep the charging base free of obstructions;
0.5m to the side and 1.5m in front. Ensure the base is on, so the robot can find it.
Once the base is setup. Turn on the main power switch.
CHARGING THE ROBOT
Please fully charge the robot before first use. Charging time is approximately 6
hours.
There are two ways to charge the robot:
a.
On the charging base.
b.
Charging directly from the power adapter.
When charging, the indicator light flashes. When it is complete the indicator turns
green. During cleaning the robot monitors its own charge level and returns to the
charging base when required. You can also put the robot into recharging mode by
pressing the
button on the remote control or on the app.
Please note:
• Do not operate the charging base in areas with strong reflections such as direct
sunlight or mirrors. If this is unavoidable please cover the reflective surfaces up, so
that the charging base is not in direct sunlight.
• For electrical safety and to prevent leaking to the floor, do not charge the robot with
the water tank fitted.
• During charging do not press any button.
Charging Indicator
Summary of Contents for iQLEAN-CR01
Page 2: ...2 ...
