Page
12
of
21
CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the WIFI light
flashing once per second. If not follow the instructions for changing the WIFI connection
mode. Also ensure your phone is connected to the WIFI network. (We advise turning
mobile data off during setup)
1. Open app and press
“+” to
add device, or use the add
device button
2. Select the type of device
as
“Fan” within the Home
Appliance tab.
3.
Press on the AP mode
button in the top right of the
screen.
4. Ensure the WIFI light on the
fan is flashing slowly (once
per three seconds), then
press on the orange button
at the bottom of the screen
to confirm
5. Enter your WIFI password
and press confirm.
6. Go to network settings in your
phone and connect to the
“SmartLife xxx” connection.
There is no password to
enter. Then return back to the
app to complete setup.
?
