7
4.
Attach the reflector panels (A) together using M6 x
8mm screws (FF), Φ6 washers (DD) and cap nuts
(GG). Secure loosely with cap nuts (GG).
Note: In order to achieve proper alignment of
reflector sections, it may be necessary to loosen the
preassembled bolts prior to assembly and retighten
once complete.
5.
Attach the reflector plate (B) to reflector panels (A)
using M6 x 8mm screws (FF), Φ6 washers (DD) and
cap nuts (GG). Secure loosely with cap nuts (GG).
Note: Once properly aligned, tighten all screws
and the preassembled bolts.
6.
Attach the reflector assembly to head assembly (C).
Secure with cap nuts (GG) and Φ6 washers (DD).
Note: Do not over tighten!