- 13 -
4.5 Charging Methods
4.5.1 Manual Charging：
1. Charging the machine with an adaptor:
Connect the plug between the machine
and the adaptor, then insert into the
socket.
2. Connect the plug between the adaptor and charging
station. Then, put the electrodes on the vacuum against
the electrodes on the charging station.Finally, connect
the power socket.
4.4 Charging Station
3
1
2
7
4
m
m
m
5
6
NO.
1
6
7
2
3
5
4
Name
LED decorative
lamp
Switch of LED
decorative lamp
Power indicator
Charging
indicator
Signal window
Charging
electrodes
DC socket
Danger!
Function
To revitalise the room, this charging station comes with a
decorative lamp that you can open up and put a frangrance in
that will be spread around the room after it reaches a certain
temperature.
Press the button, and the LED decorative lamp will open or
close.
.
The indicator will illuminate when the charging station is
on.
When charging station connects to the cleaner, the indicator
will blink.
This siginal is the only way for the cleaner to reconnect and
recharge with the charging station, so make sure the window
is cleaned regulary to ensure sensitivity and accuracy.
The charging electrodes should connect well with cleaner
electrodes or else the charging will fail.
Output end jack of adaptor.
How to use：
1. Follow the instructions from page 8, and ues the photos above.
2. Turn on the power switch, press the button “Charge” and the cleaner will move back to the
charging station.
3. In the mode “Auto Cleaning”, when the battery power is low, the machine will go back to the
charging station.
Danger!
Electric shock.
No obstacle
here.
Danger!
Electric shock.