After you set the weekly cleaning schedule you can also set the FULL GO function. Your robot will
come out every day at the time set automatically. If you want to override this function and start the
robot after it is fully charged you need to use the FULL GO function. Note: FULL GO and the schedule
cleaning cannot be set during the same hour setting.
Full GO: After finishing cleaning schedule week set up, press button until icon
flashes. Then press button. The LCD screen will display which means FULL GO is
set. Pressing button for 3 seconds will save FULL GO mode and exit and the robot will start
cleaning once fully charged.
You can also disable the FULL GO function, press button until icon flashes, press
button, then the screen will display then press AUTO button for 3 seconds to save
the settings.
Full Go Function
- 10 -
Tip:Do not place metal objects close to the negative ion function
area or it may cause electric shock.
The cleaner will produce negative ions which can improve indoor air
quality and kill germs when the cleaner is running.
4.1.2 Introduction of the Negative Ion Function
比
例
1.000
8. If you do not need the time scheduling, you can disable it by pressing the button for at least
3 second, then the robot will show you the time setting as you did before. Press button, you
will see and then press AUTO button for at least 3 second to save the setting.You can do
the same process to disable the time setting for each day.