27
Signal Information (Used only in DTV)
1. Press ▲/▼ key to select "Signal Information" option.
2. Press "OK" or ► key, you can see the information of the DTV channel.
Note:
Signal Quality/Signal Strength (DTV Only):
Unlike analogue channels, which can vary in reception quality, digital channels must have
perfect reception quality or you will not receive them at all. As such you are not able fine
tune a digital channel. If the signal strength indicates that the signal is weak, a possible
solution is to adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
OAD (On Air Download)
This option is used to enable or disable system software update from DTV broadcast.
1. Press ▲/▼ button to select “OAD” option.
2. Press ◄/► button to select “On” or “Off”.
Note: This option is only used in DTV mode.
OAD Scan
This option only used in DTV mode.
1. Press ▲/▼ button to select “OAD Scan” option.
2. Press OK button to search system software update file from DTV broadcast.
CI Information
1. Press ▲/▼ key to choose “CI information” and enter the menu.
2. Press “OK” button, you can see specific CI information including CI Module information, smart
card information, etc.
Note: This option is only used in DTV mode.
LNB Setting
1. Press ▲/▼ key to choose “LNB Setting” item.
2. Press “OK” button to display LNB Setting menu.
You can set specific setting to search DVB-S channels.
Note: This option is only used in DVB-S mode.
Signal Information
Sof tware Version
Channel
Frequency
Network
Transport stream
Service
M odulation
Signal Strengh:
Signal Quality:
1
37
592
Nine Melb
1072
64QAM
1074
