ElectrIQ eIQ-12WMINV, User And Installation Manual, Page: 19 / 30

19
. Push the drain hose onto 1
the indoor unit outlet.
2
.
Remove the raincover
from the side (Indoor
Unit).
4 . Push the male coupling
connector (2) right
inside female coupling.
. Close the retaining clip (4), 5
make sure the fingers of
the clip are engaged on
the back of the lug.
6 . Push the electrical snap
connector together.
7 . Connect the 3 wires to
the terminal board.
. Clip on the raincover and 8
fasten the retaining screw.
9 . Fold the excess cord
back on itself and clip
it with plastic ties.
10 . Screw down the unit.
You will need four
washers (not supplied).
11 . Fix the cord and drain
hose to the wall.
12 . Switch on at the mains,
run test and check for
any coolant or water
leakage.
3 . Slide the lug towards
left side (1) from female
coupling.