ElectrIQ eIQ-12WMINV, User And Installation Manual, Page: 14 / 30

14
. Check the area for any 1
hidden wires or pipes.
2 . Mark the righthand
backplate screw
position.
3 . Remove the backplate
and drill a 7mm hole.
4 . Tap home a 7mm
wallplug.
. Screw the backplate 5
to the wall using 1.5
inch number 10
screws.
6 . Check level, mark the
other holes and swing
the backplate away.
7 . Drill the rest of the
holes and tap in
wallplugs
8 . Fix the backplate to
the wall.
9 . Mark the hole centre
make sure the 3.5 inch
cutter will clear the
backplate.
10 . Drill the hole at a slight
downward angle. When
you feel the pilot drill exit
the outside wall stop
11 . Finish the hole from
the outside to keep it
clean
12 . Feed the cord and
drain hose carefully
through the wall