8
CONNECTING THE APPLIANCE TO WIFI
DOWNLOAD THE APP TO YOUR PHONE
Download the” TUYA SMART” app, from your chosen app store, using the QR codes
below, or by searching for the app in your chosen store.
Android IOS
MODES AVAILABLE FOR SETUP
The heater has two different setup modes, Quick Connection and AP (Access Point).
The quick connection is a quick and simple way to set the unit up. The AP connection
uses a direct local WiFi connection between your phone and the heater to upload the
network details.
By default, WIFI is enabled when you switch the heater on. The WIFI symbol will flash
until a connection is established. To turn the WiFi off, press and hold the WiFi button
for 10 seconds until the heater bleeps. The WiFi symbol will flash quickly to indicate
the unit is in quick connection mode
Please ensure your device is in the correct WiFi connection mode for the connection
type you are attempting, the flashing WiFi indicator on your heater will indicate this.
Connection Type
Frequency of Flashes
Quick Connection
Flashes twice per second
AP (Access Point)
Flashes once per second
CHANGING BETWEEN CONNECTION TYPES
To change between the Wifi connection modes press the WiFi button.
