ElectrIQ ECFIRPH7W User Manual Download Page 3

 

SAFETY INSTRUCTIONS 

IMPORTANT 

 

Carefully read the instructions before operating the unit 

 

This appliance is for indoor use only. 

 

Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. 

 

Installation must be in accordance with the regulations of the country where the 
unit is used. 

 

If  you  are  in  any  doubt  about  the  suitability  of  your  electrical  supply  have  it 
checked and, if necessary, modified by a qualified electrician. 

 

This heater has been tested and is safe to use. However, as with any electrical 
appliance - use it with care.  

 

Disconnect the power from the unit before dismantling, assembling or cleaning. 

 

Avoid touching any moving parts within the appliance. 

 

Never insert fingers, pencils or any other objects through the guard.  

 

This  appliance  can  be  used  by  Children  aged  from  8  years  and  above  and 
persons  with  reduced  physical,  sensory  or  mental  capabilities  or  lack  of 
experience  and  knowledge  if  they  have  been  given  supervision  or  instruction 
concerning  use  of  the  appliance  in  a  safe  way  and  understand  the  hazards 
involved.  Children  shall  not  play  with  the  appliance.  Cleaning  and  user 
maintenance shall not be carried out by children.  

 

Children aged from 3  years and less than 8  years shall only switch on/off the 
appliance  provided  that  it  has  been  placed  or  installed  in  its  intended  normal 
operating  position  and  they  have  been  given  supervision  or  instruction 
concerning  use  of  the  appliance  in  a  safe  way  and  understand  the  hazards 
involved.  Children aged from 3 years and less than 8 years shall not plug in, 
regulate, or clean the appliance or perform user maintenance.  

 

Children under 3 years should be kept away unless continuously supervised.  

 

Some  parts  of  this  product  can  become  very  hot  and  cause  burns.  Particular 
attention has to be given where children and vulnerable people are present.  

 

Do not clean the unit by spraying it or immersing it in water.  

 

Never connect the unit to an electrical outlet using an extension cord. If an outlet 
is not available, one should be installed by a qualified electrician. 

 

Never  operate  this  appliance  if  the  unit,  cord  or  plug  is  damaged.  Ensure  the 
power cord is not stretched, exposed to sharp object/edges, or routed under the 
unit. 

 

Any service other than regular cleaning should be performed by an authorised 
service representative. Failure to comply could result in a voided warranty. 

 

Never use the plug as a switch to start and turn off the heater. Use the provided 
power switch on the rear of the unit. 

 

Do not use an external timer. 

 

Do not cover the air inlet or outlet, or place items close to the unit which may 

Summary of Contents for ECFIRPH7W






















Reviews: