9
FAN SPEED
This allows the user to adjust the fan speed.
TURBO:
High fan speed, maximum heating, provides maximum dehumidifying
and heating performance (No heating when air purifier mode)
NORMAL:
Middle fan speed, eco dehumidifying and heating modes (no heating
when air purifier mode )
SLEEP:
Low fan speed, eco dehumidifying and heating modes (no heating when
air purifier mode)
OSC. (OSCILLATION FUNCTION)
There are three different option for the outer louvre on the unit. It can be set at 45
or 90 degrees, or alternatively to swing.
Set the louvre at a 45 degree angle or swing when drying clothes.
UV LIGHT (FOR AIR PURIFIER FUNCTION)
To activate the UV function press the UV button and the indicator light will
illuminate. The UV light will destroy germs and bacteria, greatly improving the
indoor air quality.
PLASMA IONISER BUTTON (IONIZATION FUNCTION)
To activate the ionizer press the Plasma Ioniser button. The LED to the right of
the button will illuminate to show the mode is active. The ionizer can refresh the
air while killing viruses, dust mites, mould and airborne allergens.
HUMIDITY/TEMPERATURE SETTING BUTTONS
In dehumidifying mode, press the up and down buttons to set the target humidity
(35~80%, in 5% increments)
When a relative humidity of 35% is selected, the dehumidifier will not stop until
the water tank is full. Please note these buttons will not adjust the desired humidity
in smart mode.
In the heating mode, press the up and down keys to set the target temperature
(16~30
º
C, in 1
°
C increments)
TIMER BUTTON
When the button is pressed, the led to the left of the button will illuminate to show
the mode has been activated. The timer can be turned off by pressing the timer
button again. The indicator LED will then turn off. The Timer can be used in 2
different ways
DELAYED POWER-ON:
With the unit in standby, activate the timer mode and
use the "UP" and "DOWN" buttons to select in how many hours you require the
unit to start.
DELAYED POWER-OFF:
With the unit running in the chosen mode, press the
timer button and use the "UP" and "DOWN" buttons to select in how many hours
you require the unit to turn off.
TANK
FULL
TANK-FULL
If the water tank is full, the indicator light will flash, please empty the water tank
to continue operation. The light will also illuminate if the tank is incorrectly fitted.
OPERATION
OPERATION
The operation light will illuminate when the unit is running to extract moisture from
the air. Please note this may not light up immediately when the unit is started and
will go out when the desired humidity is reached.
OSC
UV
PLASMA
IONISER
TIMER
Summary of Contents for DESD9LW
Page 7: ...7 PARTS Top Display...
