15
SETTING UP THE WIFI APP
BEFORE YOU START
•
Ensure your router provides a standard 2.4ghz connection.
•
If your router is dual-band ensure that both networks have different network names (SSID). The provider
of your router / Internet service provider will be able to provide advice specific to your router.
•
Place the dehumidifier as close as possible to the router during setup.
•
Once the app has been installed on your phone, turn off the data connection, and ensure your phone is
connected to your router via WiFi.
DOWNLOAD THE APP TO YOUR PHONE
Download the ”TUYA SMART” app, from your chosen app store, using the QR codes below, or by
searching for the app in your chosen store.
Android
IOS
CONNECTION METHODS AVAILABLE FOR SETUP
The smart device has two different setup modes, CF (Quick Connection) and AP (Access Point).
The quick connection is a quick and simple way to set the unit up. AP connection uses a direct
local wifi connection between your phone and the dehumidifier to upload the network details.
Before starting the setup, please ensure that your dehumidifier is in the correct standby mode for
the connection type you are attempting, the display your dehumidifier will indicate this.
To connect to the WIFI, press and hold the mode button when the unit is in stanby mode until 3
beeps are heard.
CHANGING BETWEEN CONNECTION MODES / WIFI RESET
To change the unit between the two connection types, hold the MODE button for 3 seconds. The
connection mode is signified by the frequency of the flashing Smart light. This will also remove
any previous WIFI configuration.
Connection Type
Frequency of Flashes
CF (Quick Connection)
Flashes twice per second
AP (Access Point)
Flashes once per second
Summary of Contents for DESD9LW
Page 7: ...7 PARTS Top Display...
