background image

10 

 

 

OSC. (OSCILLATION FUNCTION)

 

There are three different option for the outer louver on the unit. It can be 
set at 45 or 90 degrees, or alternatively to swing.  
Set the louvre at a 45 degree angle or swing when drying clothes. 

 

UV LIGHT (FOR AIR PURIFIER FUNCTION)

 

To activate the UV function press the UV button and the indicator light will 
illuminate. The UV light will destroy germs and bacteria, greatly improving 
the indoor air quality. 

 

PLASMA IONISER BUTTON (IONIZATION FUNCTION)

 

To activate the ionizer press the Plasma Ioniser button. The LED to the 
right of the button will illuminate to show the mode is active. The ionizer 
can refresh the air while killing viruses, dust mites, mould and airborne 
allergens. 

 

HUMIDITY/TEMPERATURE SETTING BUTTONS

 

In  dehumidify  mode,  press  the  up  and  down  buttons  to  set  the  target 
humidity (35~80%, in 5% increments) 
When a relative humidity of 35% is selected, the dehumidifier will not stop 
until the water tank is full. Please note these buttons will not adjust the 
desired humidity in smart mode. 
In  the  heating  mode,  press  the  up  and  down  keys  to  set  the  target 
temperature (16~30 

º

C, in 1 

°

C increments) 

 

TIMER BUTTON

 

When the button is pressed, the led to the left of the button will illuminate 
to  show  the  mode  has  been  activated.  The  timer  can  be  turned  off  by 
pressing the timer button again. The indicator LED will then turn off. The 
Timer can be used in 2 different ways 

DELAYED POWER-ON: 

With the unit in standby, activate the timer mode 

and use the "UP" and "DOWN" buttons to select in how many hours you 
require the unit to start. 

DELAYED  POWER-OFF:   

With  the  unit  running  in  the  chosen  mode, 

press the timer button and use the "UP" and "DOWN" buttons to select in 
how many hours you require the unit to turn off. 

 TANK FULL

 

 

TANK-FULL

 

If the water tank is full, the indicator light will flash, please empty the water 
tank  to  continue  operation.  The  light  will  also  illuminate  if  the  tank  is 
incorrectly fitted. 

 OPERATION

 

 

OPERATION

 

The  operation  light  will  illuminate  when  the  unit  is  running  to  extract 
moisture from the air. Please note this may not light up immediately when 
the unit is started, and will go out when the desired humidity is reached.  

 

OSC

 

UV

 

PLASMA 

 

   IONISER

 

TIMER

 

Summary of Contents for DESD9L






















Reviews: