6
FEATURES
Your dehumidifier belongs to the electriQ dehumidifier range featuring power saving logic.
1.
Easy to use controls
2.
Cost effective way to combat mould, condensation and damp
3.
Optional HEPA and Carbon filters for air purification
4.
Dries laundry more efficiently than a tumble dryer
5.
Designed to complement any modern space
6.
Castors for improved mobility
7.
Intelligent CPU controlled digital humidistat with 35-80% RH and room humidity display
8.
24 hours start / stop timer
9.
Tank operation or permanent drainage option with splash proof tank
10. Tank full alarm & auto-stop function
11. App control, allowing the unit to be remote scheduled and settings to be changed from Android and
IOS
– great for caravans, holiday homes, museums, children rooms, offices etc.
The CD12PW dehumidifier uses compressor technology to extract water from the environment.
Compressor dehumidifiers are ideal for normal domestic or office environments which are heated during
the winter months and maintain a temperature above 12-
15⁰C.
This dehumidifier is easy to move around on castors and is designed to extract unwanted humidity while
saving money due to
it’s power saving logic. It features an intelligent humidistat where the desired relative
humidity can be adjusted in increments of 5% between 35 and 80% ensuring the air in your room is not too
dry and that power is not wasted.
INSTALLATION
Remove any water from within the water tank before starting the unit. In order to save energy do not open
windows or doors while the unit is running. Place the unit on a hard / flat surface. On first use run the unit
continuously for 24 hrs.
TO REDUCE NOISE LEVELS:
Place a piece of carpet or a rubber mat under the unit to reduce any
vibrations while the unit is running.
FITTING THE OPTIONAL FILTERS
The optional filters can be placed in the appliance before use. The optional HEPA filter is fitted into the rear
of the filter housing. The optional Carbon filter is placed between the unit and the filter housing.
Unclip the filter
housing.
Remove the filter
housing and fit the
HEPA filter.
(If required)
Refit the filter
housing and place
the Carbon filter in
position.
(If required)
Ensure the filter
housing is securely
fastened into
position.