I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L | 0 9
2
Installation Steps
This product must have a proper electrical ground connection. Proper electrical
grounding reduces the risk of electric shock. This product is equipped with a
power supply cable that includes an equipment grounding conductor. The power
supply cable must be plugged into a compatible outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
WA R N I N G:
Improper connection of the power supply cable can result in
a risk of electric shock. Check with a qualified electrician to ensure the
product is properly grounded. Do not modify the power supply cable provided
with the product. Ensure the proper outlet is installed by a licensed and
qualified electrician.
1
INSTALL THE MOUNTING BRACKET AND CHARGER
1. The product is a stationary piece of equipment that is designed to be
mounted on a wall. The mounting template, included with the product, shows
the proper location to drill pilot holes for the mounting bracket screws.
2. Using a level, place the mounting template in the location where you would
like to mount the charger.
3. Tape the template in place and measure the height to ensure the charger is
between 31.5" (80 cm) and 47.2" (120 cm) above the ground.
N OT E:
The bracket must be mounted on a flat surface so that the bracket
does not deform when properly secured.
4. Install the mounting bracket securely to the wall,
aligning the holes in the bracket with those marked
on the wall, and secure the mounting bracket using
the provided screws or other fasteners that best
suit your specific installation needs.
5. Once the mounting bracket is installed, place the charger into the bracket
and secure the charger to the bracket using the 4 supplied T30 Torx screws.
2
INSTALL THE HOLSTER
The cable holster is optional. Install the holster—measured from the bottom
between 31.5" (80 cm) and 43.3" (110 cm) above the ground. Please select
the proper mounting hardware for your particular installation.
3
PLUG-IN INSTALLATION USING THE ATTACHED SUPPLY POWER PLUG
Insert the power plug into the power outlet (NEMA 14-50 receptacle).
4
AMPERAGE CONFIGURATION WITH THE ELECTRIFY CANADA APP
1. Download and install the Electrify Canada app on your smartphone
(available for iOS and Android).
2. Ensure that your phone’s Wi-Fi is turned on. It is not required to be
connected to a network.
3. Follow the instructions in the app to connect to your charger and configure
your amperage setting.
