![Electrify America EA2R040JPA10-00 Installation And Operation Manual Download Page 4](http://html1.mh-extra.com/html/electrify-america/ea2r040jpa10-00/ea2r040jpa10-00_installation-and-operation-manual_2379269004.webp)
Information
1)
Copyright
Copyright © 2020 Electrify America, All Rights Reserved. This document is copyright protected.
It may not be changed, reproduced, or distributed without prior agreement issued in writing
by Electrify America.
2)
About this Document
These operating instructions describe how to operate the charger properly. For your personal
safety, follow these operating instructions exactly. Hardwiring must be performed by a
certified electrician. Do not carry out any work that is not described here. When in doubt,
consult a certified electrician.
3)
Intended Use
These operating instructions apply to the charger and its use in the USA. Follow all federal,
provincial, and local laws, regulations, ordinances, codes, and safety standards.
4)
Charger – Intended Use
1)
This device is intended for indoor and outdoor use. Do not obscure the label of the
chargers. All persons using the charger must first read and understand these instructions
2)
This device is intended exclusively for the charging of electric vehicles fitted with a Type-1
plug (SAE J1772) and charging current control via the pilot signal (IEC 61851-1). Do not use
the charger to charger or supply other devices. Follow all federal, provincial, and local
laws, regulations, ordinances, and safety standards regarding use of this device.
5)
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
READ ALL THE INSTRUCTIONS BEFORE INSTALLING, OPERATING, MAINTAINING, OR USING
THIS PRODUCT. SAVE THESE INSTRUCTIONS. THEY MUST BE PROVIDED TO EACH NEW OWNER.
DANGER: RISK OF ELECTRICAL SHOCK
INSTRUCTIONS PERTAININED TO A RISK OF FIRE OR ELECTRIC SHOCK
1)
Do not use any adapters, converters, extension cords, or extension cables to increase the
length of the charging cable or supply power cord.
2)
Do not install this charger on a GFCI circuit breaker.
3)
Supervise children when device is in use. Children under 16 should not operate this device.
Also, small parts are dangerous for children. Do not install in the presence of children.
4)
Do not put fingers into the electric vehicle connector.
5)
Do not use this product if the power cord or the electric vehicle cable is frayed, has broken
insulation, or shows any other signs of damage.
6)
Do not use this product if the enclosure or the electric vehicle connector is broken,
cracked, open, or shows any other indication of damage.