Electrify America EA2R040JPA10-00 Installation And Operation Manual Download Page 19

Moving, Transportation and Storage 

 

WARNING: Improper moving or storage of this device may result in a risk of fire of electric shock. 

Do not lift or carry the charger by the cords. Do not allow the connector cable to drag or touch the ground 
when moving the charger.  

This device should be stored in a dry location between -40°F and 176°F

 

Cleaning 

The charger may only be cleaned with water; the use of lukewarm water is recommended. Do not use cleaning 

agents containing solvents. Dry the charger with a clean paper towel or soft cloth prior to use. 
Do not use this product if the power cord or the electric vehicle cable is frayed, has broken insulation, or any 
other signs of damage. Do not use this product if the enclosure or the electric vehicle connector is broken, 
cracked, open, or shows any other indication of damage.  
For further assistance, contact us at: (833) 532–2778.  

Warranty 

Customer Support can provide more information on the terms of the warranty. However, the following cases 

are not covered by the warranty: 

A. Defects or damage caused by not using the product as specified in the Installation and Operation Manual. 
B. Costs and damage caused by repair work which is not provided by an Electrify America—approved 

authorized specialist or electrician.  

Disposal 

The charger is an electrical device. Follow all federal, provincial, and local laws, regulations, 
ordinances, and safety standards regarding disposal of this device. 

 

 

 

 

 

Summary of Contents for EA2R040JPA10-00




















Reviews: