Symbols marked on the equipment
Caution refer to instruction manual and accompaning notes
Double Insulation
Equipment complies with current EU directives
ACMA mark
Batteries
Do not switch the instrument on or use it with the battery cover removed.
When installing batteries observe correct polarity do not mix old and new
batteries.
Dispose of used batteries in accordance with local regulations.
Never incinerate batteries.
For safety reasons the tester is shipped without batteries fitted.
To install or replace batteries
Replace batteries as soon as the low battery indication appears.
Switch the instrument off and disconnect from any electrical circuits.
Remove test leads.
Remove the small crosshead screw on the back of the instrument that retains
the battery cover and fit four Alkaline batteries type AA / LR6 in accordance with
the polarity shown.
Replace the battery cover and ensure it is secure before use.
The batteries should not be left in the instrument if it will not be used for an
extended period.
Overheating
Repetitive testing may generate heat within the instrument. If this occurs the hot
symbol is displayed and the instrument should be left to cool down before further
testing.
Maintenance
To
clean
the
tester
wipe
with
a
damp
cloth
with
a
mild
soap
solution
taking
care
not
to
allow
water
ingress
into
the
input
terminals.
Do
not
use
solvents
and
do
not
immerse.
Allow
the
tester
to
fully
dry
before
use.