ELECTREX S.r.l. via Claudia, 96 - 41096 Savignano s/P (MO) - Italy - Tel. +39.59.796372 Fax. +39.59.796378
SUBJECT TO CHANGE WITHOUT NOTICE 02/2004
KILO
KILO M
to the less significant digit). Once the last digit is set, it enables confirmation of the programming
of the integration time of the averages and to exit from programming.
6.2
SERIAL PORT AND THE CLOCK/CALENDAR PROGRAMMING
Simultaneously press the
key and the programming enabling key to program the
serial, the date and the time.
6.2.1
TRANSMISSION SPEED SELECTION
The transmission speed is the first selection to be made. By default on the display will appear:
Press the
key to display:
Press the
key to display
Press the
key to confirm it and continue programming.
6.2.2 PARITY TYPE SELECTION
Parity type is the second selection to be carried out. By default will be displayed:
Press the
key to display:
Press the
key to display:
Press the
key on the page selected to confirm the selection and continue with
programming.
6.2.3 TRASMISSION MODE SELECTION
The last specification of the serial to be set is the transmission mode. By default the following
is displayed:
By pressing the
key the second selection possibility is displayed:
Press the
key on the page selected to confirm the selection and proceed to
programming the other functions.
6.2.4 DATE SETTING
After programming the serial port, it access the date setting page. The display will show:
The key
increases the digit to be set (flashing).
The key
decreases the digit to be set (flashing)
The key
enables moving from one digit to another (from left to right). Once the last digit
is set, it enables confirmation of the programming and to access to the time programming page.
6.2.5 TIME SETTING
After confirming the date, it accesses the time setting page. The display will show:
The key
increases the digit to be set (flashing).
The key
decreases the digit to be set (flashing).
The key
enables moving from one digit to another (from left to right). Once the last digit
is set, it enables confirmation of the programming and to access to the selection page of the
surveyed temperature measurement unit.
6.2.6 WEEK DAY SETTING
This function is available on
KILO-M
only ad it is fundamental for recording in memory the
weekly consumtion. The data are stored in memory at 24:00 hours of each Sunday. The
display will show the default setting:
The key
increases the digit to be set (flashing).
The key
decreases the digit to be set (flashing). The correspondence between the
number and the day of the week is as follows:
0
= Monday;
1
=Tuesday;
2
=Wednesday;
3
=Thursday;
4
=Friday;
5
=Saturday;
6
= Sunday
Press the key
in the page relative to the selection to confirm and then proceed to
programming the other functions.
6.2.7 TEMPERATURE MEASUREMENT SELECTION UNIT (KILO-M)
The measurement of the ambient temperature by an internal sensor is supplied either in Celsius
(C) or in Farenheit (F). After setting the date and time it accesses the page for selecting the
temperature measurement unit. On the display will appear:
By pressing the key
the second selection will be displayed:
Press the key
on one of these two pages to select the one wanted and return to
measurement mode.
7
HARMONIC DISTORSION
A new additional function, called THD, has been implemented on all the instruments (T). This
funzion can be displayed on every phase. Such measurement represents the total harmonic distortion
on Voltage and Current for each single phase. When the instrument is switched on, the led of the
key
is ON which represents the three-phase Voltage and Current measurement page. If
the key is pressed again, the following is displayed:
If each of the three phases is pressed, the percentage representing the total harmonic phase
distorsion on Voltage and Current will be displayed.
If
,
and
keys are pressed, the following page will be displayed :
No parity
Parity Even
Parity Odd
YEAR
MONTH DAY
Flashing
digit
MINUTES
HOUR
Flashing
digit
English
Instructions
