Electrex E 230, User Manual

Page: 45 / 68

45
3. TECNICAL DATA
230 230 HF 230 TIG Pulse
PRIMARY
Single phased input voltage V 230 V (+15% / - 10%) 230 V (+15% / - 10%) 230 V (+15% / - 10%)
Frequency Hz 50/60 50/60 50/60
Maximum primary current A 43 43 43
Maximum input power
KVA 9,9 9,9 9,9
Power factor (cos Ø) 38 38 38
Slow blow fuse A 8,7 8,7 8,7
SECONDARY
No-load voltage (MMA)
(pick value)
V 95
No-load voltage (MMA)
(average value)
V 90
No-load voltage (TIG)
Voltage Reduce Device
- 11
Welding current range A 10 – 230 10 – 230 10 – 230
Welding current at 40 % A 230 230 230
Welding current at 60 % A 190 190 190
Welding current at 100% A 145 145 145
Protection degree IP 23
Insulation class H
Normes IEC / EN 60974-1
Weight kg 12.9 13.9 14.2
Dimensions L x W x H mm 370 x 210 x 440
E 230, E 230 HF and E 230 TIG PULSE welding machine models belong to a new generation of welding
inverters. This generation has been developed as integrated and portable units using the newest techniques in power
electronics, based on an inverter process with IGBT, which enables the following:
- A considerable reduction of weight and volume,
- The dynamic control of the welding current,
- The specific protection of power components,
- A high power in a small space at very low power consumption.
E 230, E 230 HF and E 230 TIG PULSE units have built-in over voltage (260V) protection which allows
engine driven generator supply.
The ventilating system is controlled automatically by means of a thermal switch which starts and stops the
ventilator according to pre-adjusted internal temperature values.