manualshive.com logo in svg

Electra TG50B, Operating Manual

Share
Download
Electra TG50B Operating Manual Download Page 6

6

13. WARNING:

 Ensure that the appliance is switched off 

before replacing the lamp to avoid the possibility of 

electric shock.

14. CAUTION:

 Accessible parts may be hot when the 

cooker or grill is in use. Young children should be kept  

away.

15. 

Your appliance is produced in accordance with all applicable 

local and international standards and regulations.

16. 

Maintenance and repair work must be made only by 

authorized service technicians. Installation and repair work  

carried out by unauthorized technicians may endanger you. 

It is dangerous to alter or modify the specifications of the 

appliance in any way.

17. 

Prior to installation, ensure that the local distribution 

conditions (nature of the gas and gas pressure or electricity 

voltage and frequency) and the requirements of the 

appliance are compatible. The requirements for this 

appliance are stated on the relevant label.

18. CAUTION:

 This appliance is designed only for cooking 

food and is intended for indoor domestic household 

use only and should not be used for any other purpose 

or in any other application, such as for non-domestic 

use or in a commercial environment or room heating.

19. 

Do not try to lift or move the appliance by using door handle.

Summary of Contents for TG50B





































Reviews:

No comments

Brands by name

Popular brands

Load more brands