manualshive.com logo in svg

Electra TG50B, Operating Manual

Share
Download
Electra TG50B Operating Manual Download Page 3

3

Dear Customer, 

Our goal is to offer you high quality products that exceed your 

expectations. Your appliance is produced in modern facilities  

and is carefully and particularly tested for quality. 

This manual is prepared to help you use your appliance, which 

has been manufactured using the most recent technology, with 

confidence and maximum efficiency.

Before using your appliance, carefully read this guide which 

includes basic information on safe installation, maintenance and 

use. Please contact your nearest Authorized Service centre for 

the installation of your product.

CE Declaration of conformity

This appliance has been designed to be used only for home cooking. Any other use 
(such as heating a room) is improper and dangerous.

This appliance has been designed, constructed and marketed in compliance with:

-Gas appliances directive, 2009/142/EC

-Low voltage directive, 2006/95/EC

-EMC directive, 2004/108/EC

-CE marking directive, 93/68/EEC

* Visuals used in this user manual are schematic and may vary  depending on model.

Summary of Contents for TG50B





































Reviews:

No comments

Brands by name

Popular brands

Load more brands