manualshive.com logo in svg

Electra TG50B, Operating Manual

Share
Download
Electra TG50B Operating Manual Download Page 26

26

2.5 Electric connection and safety (If available)

During the electric connection, follow the instructions stated in 

the user manual. 

The earthing cable must be connected to the earth terminal.

You have to ensure the power cord with suitable insulation is 

connected to the power source during the connection. If there 

is no appropriate earthed electric outlet in accordance with 

regulations in the place where the appliance is to be installed, 

contact the authorized service centre. The earthed electric outlet 

must be close to the appliance.

Do not use an extension cord.

The power cord must not touch any hot 

surface of the product.

In the case of the power cord being 

damaged, contact the Authorized Service 

centre to have it changed.

Any wrong electric connection may 

damage your appliance, as well as endangering your safety, 

rendering your guarantee invalid.

The appliance is adjusted for 230V 50Hz electricity. If the mains 

electricity is different, contact the authorized service centre.

Summary of Contents for TG50B





































Reviews:

No comments

Brands by name

Popular brands

Load more brands