Electra Roman Blinds, How To Install, Programme And Operate

Page: 8 / 16

General control
We have programmed your blind to automatically stop at preset upper and lower stop positions. It couldn't be simpler- just
press the Up or Down button
until the blind starts moving and your blind will move in the respective direction until it reaches
the preset stop position, where it will stop automatically. You can stop the blind at any point between the preset stop positions
by pressing the middle ‘my’ button.
Lowering the blind
Press the down button briefly to
send the blind to the lower stop
position.
Raising the blind
Press the up button briefly to
send the blind to the upper stop
position.
Stopping the blind
Press the 'My' button briefly to
stop the blind at an intermedi
a te
position.
8
Operation
Operating your Roman Blind