Electra Roman Blinds How To Install, Programme And Operate Download Page 15 | Manualshive

Page: 15 / 16

background image

General Maintenance continued

It is important that nothing is allowed to obstruct your Electra Roman blind when moving. Should the blind be lowered onto
an obstruction, such as an ornament on a window sill, the blind will be impeded but the motor will carry on turning and the lift
cords may become entangled in the headrail. Repairs required for cords that have become entangled in the headrail are not
covered by guarantee.

Should the blind be lowered onto an obstruction first remove the obstruction and allow the blind to hang freely. Gently tug
the bottom bar to pull through cord that has unwound within the headrail. The bottom bar should be level. The blind may
now be retracted.

Charging your blind

When the battery pack requires recharging, the blind will begin to move slowly in operation. To recharge the battery pack, plug
the charger into a plug socket and connect the charger cable into the small socket on the end of the Roman external battery
pack.
Please note: the power cable from the battery is for connection to the blind only. Connecting the cable to the charger will
result in battery damage. Please consult the labels on the battery pack for more information. The battery pack will be fully
recharged after 4 hours. If it is more convenient, the external battery pack can be disconnected from the blind and removed
from mounting clips to charge.

Remote Control, Wall Switch, Timer & Sensor batteries

:

Electra

controls are battery powered and will require replacing

periodically. Refer to the instructions supplied with the individual controls for details of the battery type and replacement.

•

Issue:

Blind is moving slowly

Solution:

The

battery

pack requires recharging.

•

Issue:

Blind is not responding

Solutions:

Check the

battery

pack is connected securely. Check

the

battery

pack is charged by re charging for 4 hours.

Replace the battery in the remote control

or wall switch.

1

5

Trouble Shooting

«
...
13
14
15
16
»

Summary of Contents for Roman Blinds

















Reviews:

No comments

Related manuals for Roman Blinds

SKYLINE BOTTOM UP

Brand: rollease acmeda Pages: 7

Brand: ROOF GLAZE Pages: 6

Country Woods Venetians

Brand: LuxaFlex Pages: 2

Brand: MySmartBlinds Pages: 22

Brand: ALTA Pages: 2

Dunkermotoren DCD22

Brand: Ametek Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands