1
Thank you for purchasing our product
SAFETY INSTRUCTION
For your own safety, please read this user manual carefully before installing the device.
Caution!
Be careful with your operations. With a dangerous
voltage you can suffer a dangerous electric shock
when touching wires!
Keep this manual for future needs
-Be carefully read this user’s manual before install and operate
-Itisabsolutelynecessaryfortheusertofollowthesafetyinstructions
-Make sure all staffs related with installation, operation, and carriage and warehouse are qualified.
-Please check carefully that there is no damage caused by transportation. Should be any dam one,
consult your dealer and don’t install this device.
Caution!
Keep this device away from rain and moisture!
Unplug mains lead before opening housing!
The applicable voltage for the lighting is between AC110-240V 56-60Hz / Electronic ballast,
230V/50Hz/Magnetic ballast. Never use it when thundering and make sure it installing and
operating this device on the applicable temperature between -5 °C ~ 45 °C, thereinnohighly
inflammable material within a distance of min.1.5m. While choosing the installation-spot, please
make sure that the device is not exposed to extreme heat, moisture and dust.
GENERAL GUIDELINES
Warning
！
Operate the device only after having familiarized with its functions. Do not permit
operation by person not qualified for operating the device. Most damages are result of
unprofessional operation!
-If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead
to dangers like short-circuit, burns, electric shock, burns due to ultraviolet radiation, lamp
explosion, crash etc.
-Read the instructions carefully before turning on the power or install this device, in order to
maintain this condition and ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions, and warning notes written in this manual
。
Keep yourself and others from electric shocks
。
-Disconnect to the fixture from AC power before change to lamp, fuse and no any equipments are
USER MANUAL - BEAM 300 / BEAM 700
