10
ASSEMBLY INSTRUCTIONS
HANDLEBARS INSTALLATION:
1. Insert handlebar post through tightening clamp
2. Insert the top of the fork base into bottom of handlebar post.
3. Line up handlebars and front wheel
4. Slide tightening clamp down to open end of fork base
5. Insert bolt and hand tightening nut into clamp and tighten.
6. Be sure that handlebars and wheel move at the same time.
THROTTLE & ACCESSORY CONTROL GRIP INSTALLATION:
1. Insert throttle into handle bars and secure with tightening screw. (Fig. 2)
2. Insert accessory control grip and secure with tightening screw. (Fig. 3)
3. Be sure screws, throttle and accessory control grip are secure and not loose.
Fig. 1
* Tightening Clamp
must line up with
the opened end
of the fork base
Handlebar Post
Tightening Clamp
Fork Base
Fig. 2
Tightening Screw
Throttle
Fig. 3
Summary of Contents for Scoot-N-Go 88615
Page 25: ...24 NOTES ...