manualshive.com logo in svg

ELECTOR 14010, User Manual

Share
Download
ELECTOR 14010 User Manual Download Page 8

Page 7

www.elector-water-treatment.com

elector – Electrochemical Water Treatment for Heating Systems

3.3.3 Mains Return System Group Underfloor

Preferred installation option for multiple heating 
circuits due to the proximity to the source of oxygen 
ingress. 

3.3.4 System Group Flow-Flow

Bypass installation using the circulation pump.

3.3.5 System Group Fow-Return

Classic bypass installation using the main circulation 
pump. The advantage is that treated water directly 
reaches other parts of the system. Due to the possible 
raise of the return temperature this method is not 
suitable for condensing technology.

3.3.6 System Group Return-Return

Proven bypass installation with its own feed pump, 
which is connected to the main circulation pump. 
Preferably also in mixed installations of radiators and 
floor heating circuits due to the proximity to the source 
of oxygen ingress.

elector

Anode mA

elector

Anode mA

elector

Anode mA

elector

Anode mA

min. 50 cm

Summary of Contents for 14010





















Reviews:

No comments

Brands by name

Popular brands

Load more brands